user true true true false ! ! Last configuration change at 18:35:38 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Cust1A ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! username cisco privilege 15 secret 5 $1$dD.H$d6.o.Aj8z.oUdbOl2e7Gu0 ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.111.111 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.110 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP11 ip address 192.168.111.111 255.255.255.0 duplex full speed auto media-type rj45 ! ! router eigrp 111 network 10.1.0.0 0.0.255.255 network 192.168.111.0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:49 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Cust2A ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! username cisco privilege 15 secret 5 $1$JTTd$9sbwKzOTaEZGFQFx6oG1H. ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.121.121 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.113 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP12 ip address 192.168.121.121 255.255.255.0 duplex full speed auto media-type rj45 ! ! router eigrp 121 network 10.1.0.0 0.0.255.255 network 192.168.121.0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:52 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ISP11 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ip vrf Cust1 rd 65211:111 route-target export 65211:111 route-target import 65221:112 route-target import 65212:121 route-target import 65231:122 ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated mpls label range 1100 1199 ! ! ! ! username cisco privilege 15 secret 5 $1$/x0M$.zPNSAiEWFHSkzlY7ephj1 ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.211.211 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.102 255.255.0.0 shutdown duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to Cust1A ip vrf forwarding Cust1 ip address 192.168.111.11 255.255.255.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/2 description to ISP13 ip address 10.211.213.211 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! ! router eigrp 211 ! address-family ipv4 vrf Cust1 autonomous-system 111 redistribute bgp 65211 metric 100 10 1 1 1 network 192.168.111.0 exit-address-family ! router bgp 65211 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 10.1.221.221 remote-as 65221 neighbor 10.1.221.221 ebgp-multihop 255 neighbor 10.1.221.221 update-source Loopback0 neighbor 10.211.213.213 remote-as 65213 ! address-family ipv4 redistribute connected route-map CONN neighbor 10.211.213.213 activate neighbor 10.211.213.213 send-label exit-address-family ! address-family vpnv4 neighbor 10.211.213.213 activate neighbor 10.211.213.213 send-community extended exit-address-family ! address-family ipv4 vrf Cust1 redistribute eigrp 111 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! route-map CONN permit 10 match interface Loopback0 ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:45 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ISP12 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ip vrf Cust2 rd 65212:121 route-target export 65212:121 route-target import 65231:122 route-target import 65211:111 route-target import 65221:112 ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! username cisco privilege 15 secret 5 $1$Yflp$DtMHLX4GbCR0xC2roTnyU. ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.212.212 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.104 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to Cust2A ip vrf forwarding Cust2 ip address 192.168.121.12 255.255.255.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/2 description to ISP13 ip address 10.212.213.212 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding ! ! router eigrp 212 ! address-family ipv4 vrf Cust2 autonomous-system 121 redistribute bgp 65212 metric 100 10 1 1 1 network 192.168.121.0 exit-address-family ! router bgp 65212 bgp log-neighbor-changes neighbor 10.1.231.231 remote-as 65231 neighbor 10.1.231.231 ebgp-multihop 255 neighbor 10.1.231.231 update-source Loopback0 neighbor 10.212.213.213 remote-as 65213 ! address-family ipv4 redistribute connected route-map CONN no neighbor 10.1.231.231 activate neighbor 10.212.213.213 activate neighbor 10.212.213.213 send-label exit-address-family ! address-family vpnv4 neighbor 10.212.213.213 activate neighbor 10.212.213.213 send-community extended exit-address-family ! address-family ipv4 vrf Cust2 redistribute eigrp 121 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! route-map CONN permit 10 match interface Loopback0 ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:34:32 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ISP13 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated mpls label range 1300 1399 ! ! ! ! username cisco privilege 15 secret 5 $1$jFIU$9D/gMoHrROQCPOoO8cOZW. ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.213.213 255.255.255.255 ip ospf network point-to-point ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.103 255.255.0.0 shutdown duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP11 ip address 10.211.213.213 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! interface GigabitEthernet0/2 description to ISP12 ip address 10.212.213.213 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! interface GigabitEthernet0/3 description to R1 ip address 10.0.213.213 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! router bgp 65213 bgp log-neighbor-changes no bgp default route-target filter neighbor 10.0.213.1 remote-as 65001 neighbor 10.1.221.221 remote-as 65221 neighbor 10.1.221.221 ebgp-multihop 255 neighbor 10.1.221.221 update-source Loopback0 neighbor 10.1.231.231 remote-as 65231 neighbor 10.1.231.231 ebgp-multihop 255 neighbor 10.1.231.231 update-source Loopback0 neighbor 10.211.213.211 remote-as 65211 neighbor 10.212.213.212 remote-as 65212 ! address-family ipv4 redistribute connected route-map CONN neighbor 10.0.213.1 activate neighbor 10.0.213.1 send-label no neighbor 10.1.221.221 activate no neighbor 10.1.231.231 activate neighbor 10.211.213.211 activate neighbor 10.211.213.211 send-label neighbor 10.212.213.212 activate neighbor 10.212.213.212 send-label exit-address-family ! address-family vpnv4 neighbor 10.1.221.221 activate neighbor 10.1.221.221 send-community extended neighbor 10.1.231.231 activate neighbor 10.1.231.231 send-community extended neighbor 10.211.213.211 activate neighbor 10.211.213.211 send-community extended neighbor 10.212.213.212 activate neighbor 10.212.213.212 send-community extended exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! route-map CONN permit 10 match interface Loopback0 ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:19 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated mpls label range 100 199 ! ! ! ! username cisco privilege 15 secret 5 $1$8Txh$4h4b4JxbbJGnq6Irtg2l/. ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.1.1 255.255.255.255 ip ospf network point-to-point ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.105 255.255.0.0 shutdown duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to R2 ip address 10.0.12.1 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto media-type rj45 mpls bgp forwarding mpls ip ! interface GigabitEthernet0/3 description to ISP13 ip address 10.0.213.1 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! router ospf 1 router-id 1.1.1.1 redistribute bgp 65001 subnets network 10.0.12.0 0.0.0.255 area 0 network 10.0.23.0 0.0.0.255 area 0 network 10.0.213.0 0.0.0.255 area 0 network 10.1.0.0 0.0.255.255 area 0 ! router bgp 65001 bgp log-neighbor-changes neighbor 10.0.213.213 remote-as 65213 neighbor 10.1.2.2 remote-as 65001 neighbor 10.1.2.2 update-source Loopback0 ! address-family ipv4 redistribute ospf 1 match internal external 1 external 2 neighbor 10.0.213.213 activate neighbor 10.0.213.213 send-label no neighbor 10.1.2.2 activate exit-address-family ! address-family vpnv4 neighbor 10.0.213.213 activate neighbor 10.0.213.213 send-community extended neighbor 10.1.2.2 activate neighbor 10.1.2.2 send-community extended exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:34:24 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated mpls label range 200 299 ! ! ! ! username cisco privilege 15 secret 5 $1$0K3S$Bij3pHrjLD4nW42d3mm0z. ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.2.2 255.255.255.255 ip ospf network point-to-point ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.107 255.255.0.0 shutdown duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to R1 ip address 10.0.12.2 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! interface GigabitEthernet0/2 description to R3 ip address 10.0.23.2 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! interface GigabitEthernet0/3 description to ISP21 ip address 10.0.221.2 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! router ospf 1 router-id 2.2.2.2 redistribute bgp 65001 subnets network 10.0.12.0 0.0.0.255 area 0 network 10.0.23.0 0.0.0.255 area 0 network 10.1.0.0 0.0.255.255 area 0 ! router bgp 65001 bgp log-neighbor-changes neighbor 10.0.221.221 remote-as 65221 neighbor 10.1.1.1 remote-as 65001 neighbor 10.1.1.1 update-source Loopback0 ! address-family ipv4 redistribute ospf 1 match internal external 1 external 2 neighbor 10.0.221.221 activate neighbor 10.0.221.221 send-label no neighbor 10.1.1.1 activate exit-address-family ! address-family vpnv4 neighbor 10.0.221.221 activate neighbor 10.0.221.221 send-community extended neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! access-list 1 permit 10.1.1.1 ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:03 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated mpls label range 300 399 ! ! ! ! username cisco privilege 15 secret 5 $1$PO6c$zeg/vAY97e97gHSpei/kl/ ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.3.3 255.255.255.255 ip ospf network point-to-point ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.106 255.255.0.0 shutdown duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto media-type rj45 mpls ip ! interface GigabitEthernet0/2 description to R2 ip address 10.0.23.3 255.255.255.0 duplex full speed auto media-type rj45 mpls ip ! interface GigabitEthernet0/3 description to ISP31 ip address 10.0.231.3 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! router ospf 1 router-id 3.3.3.3 redistribute bgp 65001 subnets network 10.0.12.0 0.0.0.255 area 0 network 10.0.23.0 0.0.0.255 area 0 network 10.1.0.0 0.0.255.255 area 0 ! router bgp 65001 bgp log-neighbor-changes redistribute ospf 1 match internal external 1 external 2 neighbor 10.0.231.231 remote-as 65231 neighbor 10.0.231.231 send-label ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:40 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ISP21 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ip vrf Cust1 rd 65221:112 route-target export 65221:112 route-target import 65211:111 route-target import 65212:121 route-target import 65231:122 ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated mpls label range 2100 2199 ! ! ! ! username cisco privilege 15 secret 5 $1$9AOD$e/9hASnf03mkOrwp5/SZo0 ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.221.221 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.108 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to Cust1B ip vrf forwarding Cust1 ip address 192.168.112.21 255.255.255.0 duplex full speed auto media-type rj45 mpls ip ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 description to R2 ip address 10.0.221.221 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding mpls ip ! ! router eigrp 221 ! address-family ipv4 vrf Cust1 autonomous-system 112 redistribute bgp 65221 metric 100 10 1 1 1 network 192.168.112.0 exit-address-family ! router bgp 65221 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 10.0.221.2 remote-as 65001 neighbor 10.1.213.213 remote-as 65213 neighbor 10.1.213.213 ebgp-multihop 255 neighbor 10.1.213.213 update-source Loopback0 ! address-family ipv4 redistribute connected route-map CONN neighbor 10.0.221.2 activate neighbor 10.0.221.2 send-label exit-address-family ! address-family vpnv4 neighbor 10.0.221.2 activate neighbor 10.0.221.2 send-community extended neighbor 10.1.213.213 activate neighbor 10.1.213.213 send-community extended exit-address-family ! address-family ipv4 vrf Cust1 redistribute eigrp 112 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! route-map CONN permit 10 match interface Loopback0 ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:51 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Cust1B ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! username cisco privilege 15 secret 5 $1$4ro2$tve7irD1mN5BKGQpW.muH/ ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.112.112 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.111 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP21 ip address 192.168.112.112 255.255.255.0 duplex full speed auto media-type rj45 ! ! router eigrp 112 network 10.1.0.0 0.0.255.255 network 192.168.112.0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:44 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ISP31 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ip vrf Cust2 rd 65231:122 route-target export 65231:122 route-target import 65212:121 route-target import 65211:111 route-target import 65221:112 ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! username cisco privilege 15 secret 5 $1$VPpu$BFIbJGX2DWg8BCWIbOg.G1 ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.231.231 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.109 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to Cust2B ip vrf forwarding Cust2 ip address 192.168.122.31 255.255.255.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 description to R3 ip address 10.0.231.231 255.255.255.0 duplex full speed auto media-type rj45 mpls bgp forwarding ! ! router eigrp 212 ! address-family ipv4 vrf Cust2 autonomous-system 122 redistribute bgp 65231 metric 100 10 1 1 1 network 192.168.122.0 exit-address-family ! router bgp 65231 bgp log-neighbor-changes neighbor 10.0.231.3 remote-as 65001 neighbor 10.1.213.213 remote-as 65213 neighbor 10.1.213.213 ebgp-multihop 255 neighbor 10.1.213.213 update-source Loopback0 ! address-family ipv4 redistribute connected route-map CONN neighbor 10.0.231.3 activate neighbor 10.0.231.3 send-label no neighbor 10.1.213.213 activate exit-address-family ! address-family vpnv4 neighbor 10.1.213.213 activate neighbor 10.1.213.213 send-community extended exit-address-family ! address-family ipv4 vrf Cust2 redistribute eigrp 122 exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! route-map CONN permit 10 match interface Loopback0 ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login local transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 18:35:53 UTC Wed Jan 13 2016 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Cust2B ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip domain name virl.info ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! username cisco privilege 15 secret 5 $1$kPFe$/KVQ3h8G8VE7XQuGUSoM1/ ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 10.1.122.122 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.1.114 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP31 ip address 192.168.122.122 255.255.255.0 duplex full speed auto media-type rj45 ! ! router eigrp 122 network 10.1.0.0 0.0.255.255 network 192.168.122.0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip ssh server algorithm authentication password ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco logging synchronous line aux 0 line vty 0 4 exec-timeout 720 0 password cisco logging synchronous login local transport input telnet ssh ! no scheduler allocate ! end